11.2.14
Cleaning the stirrer channel
Remove the stirrer chute
Wash the stirrer chute with lukewarm water and follow the
above procedure in the reverse order to refit into place
11.2.15
Easy Dry 2 Dispenser
Cleaning
Rotate counter-clockwise the easy dry 2 dispenser and
remove it from the instant product container. Completely
disassemble the easy dry 2 dispenser as shown in the
figure.
Air blow each component or clean the same with the
specific brush.
In case of removal of the
front bushing from the
instant product container,
care should be taken to
respect
the
combination
reassembly phase:
• Black single-locking front bushing--> double instant
product container.
• Beige double-locking front bushing--> single instant
product container.
Reassemble the dispenser, put it back on the instant product
container and turn clockwise until it locks into place.
English
following
during
the
93