Saeco Cristallo 600 EVO Use And Maintenance page 61

DISPLAY
2.10.
Credit Wdog
0
2.11.
Preselection
2.11.1.
Pre-selection Time
2.11.2.
It cancels pre-selection
2.12.
Cash sale cmd sending
2.13.
(EXE/PHD) safe mode
no
3.
PRODUCT SETUP
...
3.1-5
Product Before
...
3.2.
Beverage Enabling
...
3.3.
Beverage Preparation
...
3.3.
Sequence 1
0C00
Enabling this option, an internal control is activated, which resets the communication with
the payment systems if the communication is blocked.
Management of pre-selection options
Pre-selection time duration (in seconds)
It enables the current pre-selection cancellation by pressing any button other than sugar
buttons and by pressing the coin return button of the change-giver.
It enables the management of the cash sale notification command (for card reader MDB)
"safe" mode of protocol EXE/PHD.
It does not accept selling controls outside the pre-selection time of the machine.
It allows selecting the instant product for which you wish to enable powder dispensing
before water dispensing. This brewing cycle will be carried out only when the quantity of
powder to be brewed does not exceed 34.
It allows to enable or disable the beverage keys.
The vending machine can dispense up to 16 beverages.
Each beverage can be prepared by using ground coffee and/or instant products.
Technicians can select the desired products for the recipe (max 4) and their order of use.
Each component is identified by a number or a letter.
Defines the beverage ingredients and in which order they are dispensed.
The possible choices are:
0 =does not dispense any product
1 = dispenses product 1
2 = dispenses product 2
3 = dispenses product 3
4 = dispenses product 4
5 = dispenses product 5
6 = dispenses product 6
7 = dispenses product 7
8 = dispenses product 8
C = dispenses coffee beans from coffee hopper no. 2
K = dispenses coffee beans from coffee hopper no.1
L = brews coffee made from capsules
F = brews "fresh brew" coffee using pre-ground coffee
P = brews espresso coffee using pre-ground coffee
B = brews Fresh Brew coffee using coffee beans
W = dispenses hot water
S1 = dispenses syrup product 1 (optional)
S2 = dispenses syrup product 2(optional)
Consequently, the combination of "3C00" or "30C0" or "03C0" will always dispense product 3 and
coffee beans.
The settings of products making up the beverage will be requested according to the sequence.
Important
To obtain the cup only, set beverage sequence to 0000 and block sugar regulation (sugar setting =
"sugar blocked").
Description
English
61