Saeco Cristallo 600 EVO Use And Maintenance page 58

English
DISPLAY
1.30.
Change Password
1.30.1.
Password prog.
1.30.2.
Service Password
1.31.
Complete menus
1.32.
Default Menu
1.32.1.
Factory default
1.32.2.
Custom Default
1.32.2.1.
Read Custom Default
1.32.2.2.
Write Custom Default
1.33.
VM Model
1.34.
Language
1.35.
Water tank
1.36.
System Info
2.
PAYMENT SYSTEMS
...
58
Enables setting of a password or modification of the current one.
The password consists of a number between 000001 and 999999.
The 0000 value (default value) means no password.
To set the password, press the UP and DOWN keys and confirm using the ENTER key.
Allows setting a password to access the programming menu.
Allows setting a password to access the maintenance menu.
Important
If the password is lost, you will have to contact the Saeco Vending Technical Assistance
Service to regain access to the Programming Menus.
Enables selection of whether the entries of the programming menu should be shown fully or
only partially.
Management of default values for machine configurations.
The user can create and recall his own configuration.
It allows reverting the programmable parameters to factory preset values.
This operation does not reset the product counter.
Management of the configuration which has been created by the user
Restoring the configuration which has been saved by the user on the machine
Saving the user machine configuration
It allows selecting the current model of the vending machine.
The vending machine model is specified on the label located inside the right side panel.
It allows to select the language to be used by the machine.
The available languages are:
Italian, English, French, German, Spanish, Portuguese, Dutch, Turkish and Russian.
The machine texts can be modified according to the user' s needs to add new languages not included in the default
list.
(Contact the Customer Service for any information).
Enables selecting the vending machine's operation under no water conditions.
If NO (default) is selected, the vending machine works as if it were connected to the water
network and tries to refill water every 10 minutes as usual.
If "YES" is set, the VM works as if it were supplied by an independent tank. Indeed, in no
water condition, the vending machine does not try to refill water and goes into ERROR 01.
"This option allows you to access a page showing the overall machine configuration.
The display shows the following information:
First line: sw version (""x. y y. z z"" format) / program CRC (""abcd"" format)
Example: ""'SW v1. 0 2. 1 2/087c""
Second line: Boot loader version (""xx"" format) and name of the file searched for by the boot loader on the USB
key ("". s 19"" extension not displayed)
Example: ""Boot 08SAE_DA5P""
Third line: memory version (""xxx. y yy. " " format) and content CRC (""zzz"" format)
Example: ""Mem 123. 4 56. 7 89"""
The entries of the PAYMENT SYSTEMS are:
Description