Saeco Cristallo 600 EVO Use And Maintenance page 59

DISPLAY
2.1.
Protocol
2.2.
Coin validator
...
2.2.1.
Enable
no
2.2.2-6
Coin Values 1/6
0.00
2.3.
Banknote validator
...
2.3.1.
Enable
no
2.3.2.
INHIBITION LEVEL
255
2.3.3-3
Banknote Value
...
2.3.3.4.
Banknote
2.4.
MDB settings
...
2.4.1.
Recharge enabled
no
2.4.2.
Max Card Recharge
10.00
2.4.3.
Max Card Value
10.00
2.4.4-16
Coins Enabling
...
2.4.5.
Alt. payout
no
2.4.6.
Max change
0.00
Allows enabling of the parameters of the parallel coiner, the mechanical coiner, the
cancelling machine and the choice of values to be assigned to the single money channels.
By setting "Y", the parallel coiner, the mechanical coiner and the cancelling machine control
are enabled.
If set on "N", the parallel coiner (if any) connected to the vending machine will be excluded.
It allows you to set the value of the coins forwarded to the vending machine by the parallel
coiner, the mechanical coiner and the punching machine.
The following "PAIRING TABLE" indicates how channels and related payment systems are
connected to each other.
It enables the parameters of the parallel banknote validator and the choice of values to be
assigned to single banknote channels.
By setting "Y", the management of the parallel reader is enabled.
By setting "N", a parallel reader which may be connected to the vending machine is always
disabled.
Enables setting of the active level of the banknote reader inhibition signal.
Enables setting of the value of banknotes transferred to the vending machine from the
parallel reader.
Enables access to particular functions of the MDB protocol.
It allows disabling or enabling the possibility of performing any Saeco Card recharge operation
By setting RECHARGE = NO the vending machine will only deduct the cost from MDB cards.
Enables setting of the maximum credit level, beyond which all recharge operations (if
enabled) are ineffective.
By setting MAX RECHARGE = 20.00, the credit on the vending machine will be transferred
to the card if the sum does not exceed 20.00.
It enables to set the maximum credit level, beyond which the card is rejected by the system.
By setting MAX CARD VALUE = 25.00, the vending machine will reject all cards with a credit which
exceeds this amount.
If this card is detected, the display will not show the credit but a " ——" message will be displayed
and no sale will be carried out.
It enables / disables the use of Alternative Payout for the level 3 MDB change-giving coiner.
By setting "Yes" the change-giver is called on to dispense change.
Change is limited to 255 times the scaling factor (typically € 12. 7 5 for the Euro area - with scaling factor of 5).
By setting "No" change is given by exploiting the machine' s algorithm.
Max. change is 60000 units (typically € 600 for the Euro area).
Enables setting of the maximum amount of change which can be dispensed by the
change-giving coiner.
Default = 10.00.
Description
English
59