Maintenance Menu - Saeco Cristallo 600 EVO Use And Maintenance

English
9.3

Maintenance menu

The structure of the maintenance menu is indicated in
section "Structure of the Maintenance Menu".
The section "Description of Messages in the Maintenance
Menu" describes all the entries in the maintenance menu.
9.3.1 Access to the maintenance
menu
Open the door, disable the safety device (see section
"Safety Devices") and press the P2 key to enter the
maintenance menu.
To exit the maintenance menu and return to the standard
operation of the vending machine:
• Press the CANCEL button repeatedly until
appears. Select YES and press ENTER;
• remove the key from the safety switch in order to turn off
the vending machine;
• close the door and wait for the self-configuration process
to end.
76
9.3.2 Structure of the maintenance
menu
ITEM NO.
1.
1.1.
1.2.
1.3.
1.3.1.
1.3.2.
1.3.3.
1.4.
1.4.1.
1.4.2.
1.4.3.
1.4.4.
1.4.5.
1.4.6.
1.4.7.
1.5.
1.6.
1.7.
2.
2.1.
2.2.
2.3.
2.4.
2.5.
2.6.
2.7.
2.8.
2.9.
2.10.
2.11.
2.12.
"EXIT ?"
3.
3.1.
3.2.
3.3.
3.4.
4.
4.1.
4.2.
4.3.
4.4.
5.
5.1.
5.2.
(*) = Visible only if complete menus are enabled.
MENU ITEM
MAINTENANCE
Error log
Rinsing time
Water Filter
Last filter change
Remaining qty
Filter reset
Calibrations
Dose C calib.
Brew Group Calib.
EV calib.
Capsule calibration
C coffee calibration
Orientation device calibration
BU Caps calibration
Cool Down Boiler
Drain boiler
Boiler fill
STATISTICS
Total sales
Overpay
Card-In
Card-Out
Total coins
Total banknotes
Counters
Free
Beverage test
VM Code
Slave sales
Reset
SNACK 1
Photocell test
Motor alignment
Auto alignment
Temperature log
SNACK 2
Photocell test
Motor alignment
Auto alignment
Temperature log
USB KEY functions
Write on USB KEY
Read from USB KEY
*
*
*
*
*
*
*
*
*
*
*
*