Saeco Cristallo 600 EVO Use And Maintenance page 60

English
DISPLAY
2.4.7.
Exact change policy
0
2.4.8.
Min Tube Level
0
2.4.9.
Manual Tube Filling
...
2.4.10.
Manual Tube Empty
...
2.4.11.
Commit to vend
no
2.4.12-16
Bill Enabling
...
2.4.13.
Bill Escrow
no
2.4.14.
MDB Slave Address
0x40
2.4.15.
no change =no bills
...
2.5.
Max credit
255
2.6.
Multivend
no
2.7.
Overpay Time
180
2.8.
Fixed Zeroes
0
2.9.
Decimal Digits
0
60
With MDB coin return, the "no change available" status can be selected through the "CHANGE TABLE".
Note
Even if the no change available message is displayed, the vending machine continues to give change as long as
coins are present in the channels.
The minimum level (the same for all channels) can be set on a special menu item.
Enables setting of the minimum number of coins in the channels.
Default = 4.
Allows the coin return tubes to be filled by hand.
Press Esc to exit the channel loading mode.
Allows the change-giving coiner channels to be emptied by pressing the beverage selection
keys.
By setting "N", the credit inserted can be returned even if no sale has been made.
This function may be useful, for example, for changing banknotes into coins.
By setting "Y", the credit inserted can be returned as change only after the sale has been
completed.
Default = YES.
By setting "Y", an inserted banknote is stored in the escrow position by the banknote reader
(if supported); this function is supported by the banknote reader.
In this way, if the sale fails or the card system fails to charge, the banknote will be returned.
By setting "N", any inserted banknote goes to the banknote reader's stacker, so that the
banknotes cannot be returned.
Default = No.
When the vending machine is in Master mode, this menu enables setting of the address of any slave connected
vending machine.
If the vending machine is in Slave mode, it enables setting of its address.
Possible addresses are 0x40, 0x48 and 0x50.
Default = 0x40.
Allows you to disable the bill reader if there is no change.
It allows the user to set the maximum credit which can be accepted by the vending machine.
Once this limit has been reached, the payment systems are disabled so that no more credit can be
accepted.
Default = 20.00.
Enables the user to use any residual credit to purchase other beverages.
By setting "N" (no), the residual credit will be collected by the vending machine.
It establishes the maximum time (expressed in seconds) beyond which the vending machine collects the displayed
residual credit.
The time is adjustable at intervals of 10 seconds.
Setting "000" the function is disabled.
Enables setting of the number of fixed zeros of the credit.
Enables setting of the position of the decimal point of the credit.
Description