Saeco Cristallo 600 EVO Use And Maintenance page 79

DISPLAY
2.12.
Reset
...
3.
SNACK 1
...
3.1.
Photocell test
...
3.2.
Motor alignment
...
3.3.
Auto alignment
...
3.4.
Temperature log
...
4.
SNACK 2
...
4.1.
Photocell test
...
4.2.
Motor alignment
...
4.3.
Auto alignment
...
4.4.
Temperature log
...
5.
USB KEY functions
...
5.1.
Write on USB KEY
...
5.2.
Read from USB KEY
...
Allows resetting the statistical data.
It allows manual testing of the photoelectric cell system operation.
The machine emits a beep each time the photoelectric cell system detects an object.
It allows forcing the alignment of all the motors of the machine.
If the alignment is carried out successfully, the pending errors are removed and the motor is
activated for dispensing.
It allows forcing the alignment only of the motors of the machine where an error was detected.
If the alignment is carried out successfully, the pending errors are removed and the motor is activated
for dispensing.
This procedure will remove all the photoelectric cell pending errors.
Shows recorded temperatures for the product tray for the last 24 hours.
Values are recorded every 10 minutes and saved with the time of detection.
It allows manual testing of the photoelectric cell system operation.
The machine emits a beep each time the photoelectric cell system detects an object.
It allows forcing the alignment of all the motors of the machine.
If the alignment is carried out successfully, the pending errors are removed and the motor is
activated for dispensing.
It allows forcing the alignment only of the motors of the machine where an error was detected.
If the alignment is carried out successfully, the pending errors are removed and the motor is activated
for dispensing.
This procedure will remove all the photoelectric cell pending errors.
Shows recorded temperatures for the product tray for the last 24 hours.
Values are recorded every 10 minutes and saved with the time of detection.
by entering this menu, the user can access the reading and writing functions of the memory from and on USB
key.
The memory content is managed by means of files with ". M EM" extension,
which can also be obtained through the machine configurator available on www. s aecovending-online. c om.
Files are read and written only in the main folder of the key.
It is not possible to browse the subfolders.
The maximum length of the file name is 8 characters, longer file names will be displayed in a compressed way.
copies machine parameters on the USB key.
Files are saved as "NAME_xx.MEM", where XX is a number between 00 and 99;
'NAME' indicates the name of the machine model.
The software moves to the first available file in the sequence 00-99.
The user can select a file name with a numeric identifier other than the suggested one by
pressing the '+' e '-' buttons;
press the 'OK' button to finalise the selection.
It uploads the parameters stored in a ".MEM" file contained in the USB key onto the machine.
By pressing the "+" button it is possible to scroll the ".MEM" files available;
by pressing the "OK" button the file is uploaded.
If the selected file contains data which are compatible with the machine, the memory will be
updated, otherwise no change will be applied.
Description
English
79