9
PROGRAMMING AND MAINTENANCE MENU
This section illustrates how
to set up or modify the
vending
programming
maintenance settings.
It is therefore necessary to
read
it
intervene only when the
correct
sequence
operations to be performed
is fully understood.
machine
and
carefully,
and
of
9.1
Key description of programming
and maintenance phases
To scroll through the vending machine menu, the keys described
below are used.
"e" Key: ENTER
By pressing this key it is possible to enter the following
programming or maintenance level. It is also possible to
modify or confirm the values set in the entries of the
programming or maintenance menus.
"c" Key: CANCEL
By pressing this key it is possible to go back to the
previous level of the programming or maintenance menu.
It is also possible to avoid storing the previously modified
values.
"v" Key: DOWN
Pressing this key it is possible to access the previous entry
inside the same level. If used after a setting modification
request, the value of this setting decreases.
"^" Key: UP
By pressing this key it is possible to access the next entry
inside the same level. If used after requesting the change of
a setting, the value of this setting increases.
English
45