Programming Menu - Saeco Cristallo 600 EVO Use And Maintenance

English
9.2

Programming menu

The structure of the programming menu is indicated in
section "Structure of the Programming Menu".
The section "Description of Messages in the Programming
Menu" describes all the entries in the programming menu.
9.2.1 Access to the programming
menu
Open the door, disable the safety device (see section
"Safety Devices") and press the P1 key to enter the
programming menu.
If no password has been assigned, the programming menu
is entered directly.
If a password was assigned
to the vending machine to
enable the programming
menu, the
"PASSWORD 000000" will
appear on the display with
a flashing cursor on the
first digit.
46
Now the password should
be entered using the UP
and DOWN keys. Confirm
the
pressing the ENTER key.
Proceed as follows to exit the programming menu and
return to standard operation of the vending machine:
• Press the CANCEL button repeatedly until
appears. Select YES and press ENTER;
• remove the key from the safety switch in order to turn off
the vending machine;
• close the door and wait for the self-configuration process
to end.
message
digit entered by
"EXIT ?"