Saeco Cristallo 600 EVO Use And Maintenance page 72

English
DISPLAY
6.10.4.
Photoelectric cells block
6.10.5.
Credit Return
6.11.
Capacity ctrl enabled
6.12.
Capacity
6.13.
Enabled groups
72
Max. number of consecutive photoelectric cell errors before the system of detection of the product fall is
deactivated.
If it is set to 0, the system will never be disabled.
(NOTE: typing 999 on the keypad, the display of the vending machine will show for a few seconds a message
concerning the status of the photoelectric cell system - see the section - Display of Special Information).
Activates/ deactivates the return of the product cost to the user, if the fall of the product
has not been detected.
To prevent a customer from selecting a product of which the machine has run out, each
spiral can be enabled to supply only a preset number of products.
The following is necessary in order to operate with independent control:
1- enable independence control (menu "Capacity ctrl enabled");
2- programme the capacity of each spiral (menu "Capacity");
3- inform the vending machine each time it is refilled.
This information can be sent by pressing button 5 (black) on the 5-button keypad or by
selecting product "997" within 20 seconds of closing the door or switching the vending
machine on.
Once these first 20 seconds have passed, selecting "997" will have no effect.
When the vending machine is informed that refilling has taken place, it presumes that all
spirals have been filled up to the capacity specified during programming (step 2).
Once the maximum number of supplies has been reached, the spiral is disabled and the
product is listed as unavailable to the customer.
No error is reported.
Unit Management
Several motors can be grouped together within a unit. In this way, when the unit code is
selected, a product is dispensed from one of the unit motors.
Description