Saeco Cristallo 600 EVO Use And Maintenance page 67

DISPLAY
4.5.
Free
Never
4.6.
Free On
Immgvsd 00:00
4.7.
Free Off
Immgvsd 00:00
4.8.
Diff Prices 1-On
Immgvsd 00:00
4.9.
Diff Prices 1-Off
Immgvsd 00:00
4.10.
Diff Prices 2-On
Immgvsd 00:00
4.11.
Diff Prices 2-Off
Immgvsd 00:00
5.
SNACK 1
...
5.1.
Enable
...
5.2.
Enable Refrigerat.
...
5.3.
Model
...
5.4.
Food mode enabled
...
5.5.
Temperature 1
...
5.6.
Defrost Time
...
5.7.
Defrost Interval
...
5.8-8
Food Mode Settings
...
Allows you to select if the beverages will be provided free-of-charge, upon payment, or
free-of-charge within a time range.
Allows the beginning and end of the free-of-charge beverage supply to be set.
Allows the beginning and end of beverage supply with differentiated prices to be set.
Allows the beginning and end of beverage supply with differentiated prices to be set.
Snack 1 (or snack 2) slave settings
A special interconnection kit allows connecting up to 2 slave spiral vending machines to the
vending machine.
Important
The products of the first slave will be identified by the numbers from 111 to 199, while the
products of the second slave will be associated to the numbers from 211 to 299.
The following menus allow the parameters for each of the 2 possible slaves to be set.
It allows the vending machine to control slave 1 (or slave 2).
NO = temperature control disabled, cooling group always OFF.
YES = temperature control enabled.
It selects the machine submodel: the values are 6S for the models with 6-spiral drawers (i.e.
Corallo) and 8S for those with 8-spiral drawers (i.e. Aliseo).
Optimises the fan settings for the specific case of the machine.
Enables / disables the "food mode".
This mode enables the machine to check that the food area temperature is always lower than a set value (alarm
temperature).
If the temperature exceeds this limit value for longer than the time set for "Alarm max. time", the machine
deactivates the selections for the food shelves.
[° C] Allows the setting of the temperature desired inside the machine [Range: 3 .. 30].
The control turns off the cooling group if the set value is reached and it turns it on if the
temperature is higher than the target plus 1°C (as long as the technical specifications of the
cooling group are respected).
[min] It allows setting how many minutes the cooling group will be switched off to carry out
the defrost [Range: 10 .. 100].
[hour] It allows setting the period of time between two defrost cycles [Range: 0.. 99].
Food mode settings
Description
English
67