English
Remove the cap and the powders chute.
Turn the ring nut clockwise and remove the mixer body.
Remove the fan by levering carefully with a flat
screwdriver.
Wash all components with lukewarm water and pay
particular attention not to damage the fan.
90
Assemble the components in reverse order and connect
the dispensing hose correctly.
11.2.9
Cleaning the dispensing
outlet
Operate on the dispensing outlet locking lever.
Remove the dispensing outlet.
Remove the lower plate from the dispensing outlet and
wash it thoroughly with lukewarm water.
Reassemble the lower plate onto the dispensing outlet
only when they are completely dry.
Assemble the components in reverse order.