Saeco Cristallo 600 EVO Use And Maintenance page 105

Error
Cause
Code
Spiral motor rotation
56
not read.
Spiral motor rotation
57
not read.
Photoelectric cells -
58
product fall detected only
after the correction (spiral
extra movement)
Photoelectric cells -
59
product fall not
detected.
Photoelectric cells - the
60
maximum number of
consecutive E59 errors in a
selection has been reached.
Communication error
61
with snack power
board
Communication error
62
with Hot bev. power
board
Photoelectric cells - the
70
maximum number of
consecutive E59 errors on
different selections has
been reached.
Photoelectric cell system
disabled
Photoelectric cells - 71
photoelectric cell system
temporarily disabled
because the system has
been darkened prior to a
sale (e.g. by a not
removed product).
Watchdog operation 72
Food error - the
75
detected temperature
was over the limit for a
longer time than
allowed
Dispensing slot 76
motorlock
MDB coin return 80
error message
Rest return mechanism
81
blocked
Consumed softener 83
filter signal
Machine without Machine With
snack slaves Snack Slaves
--- Selection disabled
--- Selection disabled
--- Warning only
--- Warning only
--- Selection disabled
--- Slave disabled
Error not indicated Error not indicated
Photoelectric cell
---
system disabled
--- Warning only
Warning only Warning only
Food products
---
disabled
--- error not reported
(device not
available)
Warning only Warning only
--- ---
Warning only Warning only
Notes / Recommended Intervention
Selection disabled.
Use the "automatic alignment" to enable again.
Selection disabled.
Use the "automatic alignment" to enable again.
Warning report only in the LOG.
Check that the products have been
correctly supplied in the spirals.
Warning in the error LOG - Credit
returned (if the function is enabled)
Selection disabled.
Use the "automatic alignment" to enable
again.
Check the connections between power
board and CPU board
Check the product supply.
Check the photoelectric cell system.
Press key 4 on the 5-button keypad to re-enable.
Warning report only in the LOG.
Warning report only in the LOG.
Press key 5 on the 5-button keypad to
re-enable.
Check the product dispensing slot locking
device (motor, microswitch and wiring
harness).
Warning report only in the LOG.
Check the coin return.
Check the change return mechanism.
Maintain the softener filter
English
105