6.3
Use of different-sized stirrers
The vending machine is delivered with the stirrer set designed for use of
90 mm stirrers.
If 90 mm stirrers are used,
make sure that the rubber pin
is inserted in the hole.
To substitute the 90 mm stirrers with those of 105 mm or 115 mm
proceed as follows:
• Unfasten the two screws fixing the stirrer guide;
• Move the stirrer guide into the hole corresponding to the desired
dimension and tighten the two screws.
6.4
Label application
6.4.1
Product labels
Remove the cup dispenser and unscrew the 4 knobs
holding the keypad panel in place.
Remove the keypad panel.
English
27