Installation; Warning; Unpacking And Positioning - Saeco Cristallo 600 EVO Use And Maintenance

6

INSTALLATION

6.1

Warning

The vending
cannot
outdoors; avoid placing it
in areas
temperature is less than
2°C or more than 32°C
and in particularly dump or
dusty areas. It should not
be installed
subject to explosion or fire
hazards, or where cleaning
is done with water jets.
Before unpacking, check that the installation area complies
with the following specifications:
• the power socket must be located in an easily accessible
area, not more than 1.5 meters away;
• the socket voltage must comply with that on the
identification plate;
• the surface or floor must NOT have a gradient of more
than 2°.
The vending machine must
be installed on a flat
surface.
If the vending machine needs to be positioned close to a
wall, it is necessary to leave a space of at least 15 cm
between the back and the wall in order to keep the air
outlet grille free.
machine
be installed
where the
in places
6.2

Unpacking and positioning

On receipt of the vending machine make sure that it has
not been damaged during transportation and that package
has not been tampered with or that internal parts have not
been removed.
A bag, called "CUSTOMER KIT", is supplied with the
vending machine. It contains the following items:
• Instruction booklet
• Power cord
• Door safety microswitch disabling keys (Maintenance
Technician)
• Product labels and prices
• Instruction plate
Remove the transparent protective film and the four angle
bars.
English
25