Saeco Cristallo 600 EVO Use And Maintenance page 103

Error
Cause
Code
Instant product boiler
13
temperature sensor
reading out of range
reading of coffee 14
boiler temperature
sensor out of range
Cup holder movement 17
not detected
Brew group not
20
detected
Abnormal coffee
22
brewing flow
detected
pump used beyond 23
maximum time limit
No filling of the
24
instant product boiler
Air sensor error 27
Evaporator sensor
29
error
Decimal point position
31
setting not consistent
with the payment
system
Credit management restart 32
Warning for normal 34
situation restoring
after abnormal flow
MDB slave error detected
35
Machine without Machine With
snack slaves Snack Slaves
Models with 2 boilers Beverages with
==>beverages with instant products
instant products not not available
available
Instant Models ==>
Vending machine out of
service
Models with 2 Models with 2
boilers ==> coffee boilers ==> coffee
beverages not beverages not
available available
Models with 1 Models with 1
boiler ==> boiler ==> no
Vending machine beverage available
out of service
No more cups No more cups
warning warning
Coffee beverages Coffee beverages
not available not available
Coffee beverages Coffee beverages
not available not available
Warning only Warning only
Models with 2 boilers Beverages with
==>beverages with instant products
instant products not not available
available
Instant Models ==>
Vending machine out of
service
The slave is disabled
---
(only if the refrigerator
is enabled)
--- Warning only
Vending machine Vending machine
out of service out of service
Warning only Warning only
Warning only Warning only
Vending machine out of Vending machine out of
service service
Notes / Recommended Intervention
Check the instant product boiler
(connections, thermostats, temperature
sensor).
Check the coffee boiler (connections,
thermostats, temperature sensor).
Warning report only in the LOG.
"No more cups" message is displayed.
The vending machine can still dispense beverages
without cups.
Fill in the cup columns.
Check the cup dispenser.
Warning report only in the LOG.
"Coffee not available" message on the display.
Check the brew group inserting status.
Check the brew group cleaning.
Set a coarser coffee grind.
Check the flowmeter.
Check beverage programming; check flowmeter and
water circuit.
Check the instant product boiler water
circuit.
Check the air temperature sensor
connection.
Warning report only in the LOG.
Check the evaporator temperature sensor
connection.
Check for consistency between decimal
point settings in the vending machine and
in the payment system
Warning report only in the LOG.
Warning report only in the LOG.
Check the ground coffee granulometry.
Check the slave MDB mode (3 is the only mode
allowed).
English
103