Connection To The Electric Network - Saeco Cristallo 600 EVO Use And Maintenance

Before connecting
appliance
network, please read and
follow the
regulations in force in your
country.
Remove the cap from the coupling placed on the vending
machine back panel. Connect the water network hose (supplied
with the appliance) to the vending machine 3/4" Gas coupling.
The water
should be certified according
to the standard IEC 61770.
the
to water
applicable
mains pipe
The new hose-sets supplied
with the appliance are to be
used and that old hose-sets
should not be reused.
6.10 Connection to the electric
network
The Maintenance Technician,
who is responsible for the
installation of the vending
machine, must ensure that:
• the electric system complies with current safety regulations;
• the supply voltage corresponds to that indicated on the data plate.
If in doubt, do not proceed
with the installation and ask
qualified and
personnel
system accurately.
The vending machine is equipped with a power cord which must be
plugged into the appropriate socket on the vending machine back panel.
English
authorized
to check the
35