Modifying A Syslog Id - Alcatel-Lucent 7450 System Management Manual

Modifying a Syslog ID

Modifying a Syslog ID
NOTE: All references to the syslog ID must be deleted before the syslog ID can be removed.
Use the following CLI syntax to modify a syslog ID parameters:
CLI Syntax: config>log
The following displays an example of the syslog ID modifications:
Example
The following displays the syslog configuration:
A:ALA-12>config>log# info
----------------------------------------------
...
...
----------------------------------------------
A:ALA-12>config>log#
Deleting a Syslog
Use the following CLI syntax to delete a syslog file:
CLI Syntax: config>log
The following displays an example to delete a syslog ID:
Page 446
syslog syslog-id
description description-string
address ip-address
log-prefix log-prefix-string
port port
level {emergency|alert|critical|error|warning|notice|in-
fo|debug}
facility syslog-facility
:
config# log
config>log# syslog 1
config>log>syslog$ description "Test syslog."
config>log>syslog# address 10.10.0.91
config>log>syslog# facility mail
config>log>syslog# level info
syslog 1
description "Test syslog."
address 10.10.10.91
facility mail
level info
exit
no syslog syslog-id
7450 ESS System Mangement Guide