Alcatel-Lucent 7450 System Management Manual page 314

Page 314
Table 30: Show System Information Output Fields (Continued)
Label
Telnet/SSH/FTP Oper
BOF Source
Image Source
Config Source
Last Booted Config File
Last Boot Cfg Version
Last Boot Config Header
Last Boot Index Version
Last Boot Index Header
Last Saved Config
Time Last Saved
Changes Since Last Save
Time Last Modified
Max Cfg/BOF Backup Rev
Displays the operational state of the Telnet, SSH, and FTP ses-
sions.
The boot location of the BOF.
primary — Specifies whether the image was loaded from
the primary location specified in the BOF.
secondary — Specifies whether the image was loaded from
the secondary location specified in the BOF.
tertiary — Specifies whether the image was loaded from
the tertiary location specified in the BOF.
primary — Specifies whether the configuration was loaded
from the primary location specified in the BOF.
secondary — Specifies whether the configuration was
loaded from the secondary location specified in the BOF.
tertiary — Specifies whether the configuration was loaded
from the tertiary location specified in the BOF.
Displays the URL and filename of the configuration file used
for the most recent boot.
Displays the version of the configuration file used for the most
recent boot.
Displays header information of the configuration file used for
the most recent boot.
Displays the index version used in the most recent boot.
Displays the header information of the index used in the most
recent boot.
Displays the filename of the last saved configuration.
Displays the time the configuration was most recently saved.
Yes — The configuration changed since the last save.
No — The configuration has not changed since the last save.
Displays the time of the last modification.
The maximum number of backup revisions maintained for a
configuration file. This value also applies to the number of revi-
sions maintained for the BOF file.
7450 ESS System Mangement Guide
Description