Alcatel-Lucent 7450 System Management Manual page 477

Parameters eq | neq | lt | lte | gt | gte — This operator specifies the type of match. Valid operators are listed in the
severity-name — The ITU severity level name. The following table lists severity names and
corresponding numbers per ITU standards M.3100 X.733 & X.21 severity levels.
subject
Syntax subject {eq|neq} subject [regexp]
no subject
Context config>log>filter filter-id>entry entry-id>match
Description This command adds an event subject as a match criterion.
The subject is the entity for which the event is reported, such as a port. In this case the port-id string
would be the subject. Only one subject command can be entered per event filter entry. The latest
subject command overwrites the previous command.
The no form of the command removes the subject match criterion.
Default no subject — No subject match criterion specified.
7450 ESS System Mangement Guide
table below.
Operator
eq equal to
neq not equal to
lt less than
lte less than or equal to
gt greater than
gte greater than or equal to
Severity Number
1 cleared
2 indeterminate (info)
3 critical
4 major
5 minor
6 warning
Values
cleared, intermediate, critical, major, minor, warning
Notes
Severity Name
Event and Accounting Logs
Page 477