Alcatel-Lucent 7450 System Management Manual page 134

Ethernet service switch
Hide thumbs Also See for 7450:
Table of Contents

Advertisement

Management Access Filter Commands
mask — Specifies the 16 bit mask to be applied when matching the port.
range start end — an inclusive range of source or destination port values to be used as match criteria.
start of the range and end of the range are expressed as decimal integers.
port-list port-list-name — A string of up to 32 characters of printable ASCII characters. If special
characters are used, the string must be enclosed within double quotes.
router
Syntax
router service-name service-name
router {router-instance}
no router
Context
config>system>security>mgmt-access-filter>ip-filter>entry
config>system>security>mgmt-access-filter>ipv6-filter>entry
Description
This command configures a router name or service ID to be used as a management access filter match
criterion.
The no form the command removes the router name or service ID from the match criteria.
Parameters
router-instance — Specify one of the following parameters for the router instance:
service-name service-name — Specifies an existing service name up to 64 characters in length.
renum
Syntax
renum old-entry-number new-entry-number
Context
config>system>security>mgmt-access-filter>ip-filter
config>system>security>mgmt-access-filter>mac-filter
Description
This command renumbers existing management access filter entries for an IP(v4), IPv6, or MAC fil-
ter to re-sequence filter entries.
The exits on the first match found and executes the actions in accordance with the accompanying
action command. This may require some entries to be re-numbered differently from most to least
explicit.
Parameters
old-entry-number — Enter the entry number of the existing entry.
Page 134
Values
[0x0000..0xFFFF] | [0..65535] | [0b0000000000000000..0b1111111111111111]
Values
start, end, port-number: 1 -65535
router-name — Specifies a router name up to 32 characters to be used in the match criteria.
service-id — Specifies an existing service ID to be used in the match criteria.
Values
1 — 2147483647
Values
1 — 9999
7450 ESS System Mangement Guide

Advertisement

Table of Contents
loading

Table of Contents