Alcatel-Lucent 7450 System Management Manual page 229

Parameters verbose — This parameter sends the send the same events as just "log-events" plus Hold Down Start,
static-policer
Syntax [no] static-policer policer-name [create]
Context config>system>security>dist-cpu-protection>policy
Description Configures a static enforcement policer that can be referenced by one or more protocols in the policy.
Once this policer-name is referenced by a protocol, then this policer will be instantiated for each
object (e.g. SAP or network interface) that is created and references this policy. If there is no policer
resource available on the associated card/fp then the object will be blocked from being created. Mul-
tiple protocols can use the same static-policer.
Parameters policy-name — Specifies the name of the policy.
7450 ESS System Mangement Guide
Hold Down End, DcpDynamicEnforceAlloc and DcpDynamicEnforceFreed events. The
optional "verbose" includes the allocation/de-allocation events (typically used for debug/tuning
only – could be very noisy even when there is nothing much of concern).
Values [32 chars max]
Security
Page 229