Alcatel-Lucent 7450 System Management Manual page 171

hash — When hash is not specified, then non-encrypted characters can be entered. When hash is
md5 key — The authentication protocol can either be HMAC-MD5-96 or HMAC-SHA-96.
sha key — The authentication protocol can be either HMAC-MD5-96 or HMAC-SHA-96.
privacy none — Do not perform SNMP packet encryption.
privacy des-key key-2 — Use DES for SNMP payload encryption and configure the key. The key
privacy aes-128-cfb-key key-2 — Use 128 bit CFB mode AES for SNMP payload encryption and
group
Syntax group group-name
no group
Context config>system>security>user>snmp
Description This command associates (or links) a user to a group name. The group name must be configured with
the config>system>security>user >snmp>group command. The access command links the group
with one or more views, security model (s), security level (s), and read, write, and notify permissions
Default No group name is associated with a user.
Parameters
group-name — Enter the group name (between 1 and 32 alphanumeric characters) that is associated
cannot-change-password
Syntax [no] cannot-change-password
7450 ESS System Mangement Guide
configured, then all specified keys are stored in an encrypted format in the configuration file. The
password must be entered in encrypted form when the hash parameter is used.
The MD5 authentication key is stored in an encrypted format. The minimum key length is
determined by the config>system>security>password>minimum-length value. The maximum
length is 16 octets (32 printable characters).
The complexity of the key is determined by the complexity-rules command.
The sha authentication key is stored in an encrypted format. The minimum key length is
determined by the config>system>security>password>minimum-length value. The maximum
length is 20 octets (40 printable characters).
The complexity of the key is determined by the complexity-rules command.
Default privacy none
must be a 32 hex-character string and is stored in an encrypted format.
configure the key. The key must be a 32 hex-character string and is stored in an encrypted
format.
Default privacy none
with this user. A user can be associated with one group-name per security model.
Security
Page 171