Table 33: Show Source Access List Output Fields - Alcatel-Lucent 7450 System Management Manual

src-access-list
Syntax
Context
Description
Output
Page 326
Communities
==============================================================================
community access
------------------------------------------------------------------------------
my-public2 r
==============================================================================
A:ALA-1#
src-access-list [list-name]
show>system>security>snmp
This command displays source access lists and the hosts for each. Including the list-name parameter
modifies the output show only the specified src-access-list.
Source Access List Ouput — The following table describes the source access list output fields.
Sample Output

Table 33: Show Source Access List Output Fields

Label
List Name
Host Name
Host Address
Total Access Lists
A:ALA-1# show system security snmp src-access-list
=============================================================================
Source Access Lists
=============================================================================
List Name
HostName
-----------------------------------------------------------------------------
L1
H1
H2
L2
HA
HB
-----------------------------------------------------------------------------
Total Access Lists: 2
=============================================================================
A:ALA-1#
view
src-access-list
no-security
my-list1
The name of the src-access-list.
The name of the src-host.
The IP address of the src-host.
The total number of source access lists displayed.
Host Address
100.100.100.1
100.100.100.2
100.100.101.1
100.100.101.2
7450 ESS System Mangement Guide
version group name
authFailures
v1 v2c snmp-ro
5
Description