Alcatel-Lucent 7450 System Management Manual page 525

...
OSPF
PIM
...
PORT
...
SYSTEM
...
USER
...
VRTR
...
===================================
A:ALA-1#
event-control
Syntax event-control [application [event-name | event-number]]
Context show>log
Description
This command displays event control settings for events including whether the event is suppressed or
generated and the severity level for the event.
If no options are specified all events, alarms and traps are listed.
Parameters application — Only displays event control for the specified application.
event-name — Only displays event control for the named application event.
event-number — Only displays event control for the specified application event number.
Output Show Event Control Output — The following table describes the output fields for the event
control.
7450 ESS System Mangement Guide
Default All applications.
Values
chassis, debug, dhcp, efm_oam, filter, gsmp, igmp_snooping, ip, isis, lag, ldp,
logger, mc_redundancy, mirror, mpls, ntp, oam, ospf, port, ppp, rip, route_policy,
rsvp, security, snmp, stp, svcmgr, system, user, vrrp, vrtr
Default All events for the application.
Default All events for the application.
Label
Application
ID#
Event Name
The application name.
The event ID number within the application.
— An "L" in front of an ID represents event types that do not
L
ID#
generate an associated SNMP notification. Most events do generate a
notification, only the exceptions are marked with a preceding "L".
The event name.
Event and Accounting Logs
Description
Page 525