Alcatel-Lucent 7450 System Management Manual page 168

Profile Management Commands
entry
Syntax [no] entry entry-id
Context config>system>security>profile user-profile-name
Description
This command is used to create a user profile entry.
More than one entry can be created with unique entry-id numbers. Exits when the first match is found
and executes the actions according to the accompanying action command. Entries should be
sequenced from most explicit to least explicit.
An entry may not have any match criteria defined (in which case, everything matches) but must have
at least the keyword action for it to be considered complete.
The no form of the command removes the specified entry from the user profile.
Default No entry IDs are defined.
Parameters
entry-id — An entry-id uniquely identifies a user profile command match criteria and a
profile
Syntax [no] profile user-profile-name
Context config>system>security
Description This command creates a context to create user profiles for CLI command tree permissions.
Profiles are used to either deny or permit user console access to a hierarchical branch or to specific
commands.
Once the profiles are created, the user command assigns users to one or more profiles. You can
define up to 16 user profiles but a maximum of 8 profiles can be assigned to a user. The user-profile-
name can consist of up to 32 alphanumeric characters.
The no form of the command deletes a user profile.
Default user-profile default
Parameters user-profile-name — The user profile name entered as a character string. The string is case sensitive
renum
Syntax renum old-entry-number new-entry-number
Context config>system>security>profile user-profile-name
Page 168
corresponding action. If more than one entry is configured, the entry-ids should be numbered in
staggered increments to allow users to insert a new entry without requiring renumbering of the
existing entries.
Values 1 — 9999
and limited to 32 ASCII 7-bit printable characters with no spaces.
7450 ESS System Mangement Guide