Alcatel-Lucent 7450 System Management Manual page 99

Management Access Filter Commands
config
— system
7450 ESS System Mangement Guide
— security
— [no] management-access-filter
— [no]
— [no]
ip-filter
— default-action {permit | deny}
— [no] entry entry-id
— action {permit | deny | deny-host-unreachable}
— no action
— description description-string
— no description
— dst-port value [mask]
— no dst-port
— [no] log
— protocol protocol-id
— no protocol
— router {router-instance}
— no router
— src-ip {ip-prefix/mask | ip-prefix netmask}
— no src-ip
— src-port {port-id | cpm | lag lag-id }
— no src-port
— src-port old-entry-number new-entry-number
— [no] shutdown
mac-filter
— default-action {permit | deny}
— [no] entry entry-id
— action {permit | deny | deny-host-unreachable}
— no action
— description description-string
— no description
— [no] log
— match frame-type frame-type
— no match
— cfm-opcode
— cfm-opcode
— no cfm-opcode
— dot1p dot1p-value [dot1p-mask]
— dsap dsap-value [dsap-mask]
— dst-mac ieee-address [ieee-address-mask]
— no dst-mac
— etype 0x0600..0xfff
— no etype
— snap-oui
— snap-pid
— no snap-pid
— src-mac ieee-address [ieee-address-mask]
— no src-mac
— ssap ssap-value [ssap-mask]
— no ssap
— svc-id service-id
— no svc-id
{lt | gt | eq} opcode
range start end
{zero | non-zero}
snap-pid
Security
Page 99