Alcatel-Lucent 7450 System Management Manual page 145

Description This command configures the number of days a user password is valid before the user must change
their password. This parameter can be used to force the user to change the password at the configured
interval.
The no form of the command reverts to the default value.
Default No aging is enforced.
Parameters days — The maximum number of days the password is valid.
attempts
Syntax attempts count [time minutes1 [lockout minutes2]
no attempts
Context config>system>security>password
Description
This command configures a threshold value of unsuccessful login attempts allowed in a specified
time frame.
If the threshold is exceeded, the user is locked out for a specified time period.
If multiple attempts commands are entered, each command overwrites the previously entered com-
mand.
The no attempts command resets all values to default.
Default count: 3
time minutes: 5
lockout minutes: 10
Parameters count — The number of unsuccessful login attempts allowed for the specified time. This is a
time minutes — The period of time, in minutes, that a specified number of unsuccessful attempts can
lockout minutes — The lockout period in minutes where the user is not allowed to login. Allowed
7450 ESS System Mangement Guide
Values 1 — 500
mandatory value that must be explicitly entered.
Values 1 — 64
be made before the user is locked out.
Values 0 — 60
values are decimal integers.
Values 0 — 1440 | infinite
When the user exceeds the attempted count times in the specified time, then that user is locked
out from any further login attempts for the configured time period.
Default 10
Values
0 — 1440
Values infinite; user is locked out and must wait until manually unlocked before any
further attempts.
Security
Page 145