Alcatel-Lucent 7450 System Management Manual page 125

pre-login-message
Syntax pre-login-message login-text-string [name]
no pre-login-message
Context config>system>login-control
Description This command creates a message displayed prior to console login attempts on the console via Telnet.
Only one message can be configured. If multiple pre-login-messages are configured, the last mes-
sage entered overwrites the previous entry.
It is possible to add the name parameter to an existing message without affecting the current
pre-login-message.
The no form of the command removes the message.
Default No pre-login-message is defined.
Parameters login-text-string — The string can be up to 900 characters. Any printable, 7-bit ASCII characters can
name — When the keyword name is defined, the configured system name is always displayed first in
ssh
Syntax ssh
Context config>system>login-control
Description This command enables the context to configure the SSH parameters.
client-cipher-list protocol-version
Syntax client-cipher-list protocol-version version
Context config>system>security>ssh
Description This command enables configuration the list of allowed ciphers by the SSH client.
Parameters
version — Specifies the SSH version.
7450 ESS System Mangement Guide
be used. If the string contains special characters (#, $, spaces, etc.), the entire string must be
enclosed within double quotes. Some special characters can be used to format the message text.
The \n character creates multiline messages and the \r character restarts at the beginning of the
new line. For example, entering \n\r will start the string at the beginning of the new line, while
entering \n will start the second line below the last character from the first line.
the login message. To remove the name from the login message, the message must be cleared and
a new message entered without the name.
Values 1 — Specifies that the SSH server will only accept connections from clients that
support SSH protocol version 1
Security
Page 125