Alcatel-Lucent 7450 System Management Manual page 183

TACACS+ Client Commands
server
Syntax server index address ip-address secret key [port port]
no server index
Context config>system>security>tacplus
Description This command adds a TACACS+ server and configures the TACACS+ server IP address, index, and
key values.
Up to five TACACS+ servers can be configured at any one time. TACACS+ servers are accessed in
order from lowest index to the highest index for authentication requests.
The no form of the command removes the server from the configuration.
Default No TACACS+ servers are configured.
Parameters index — The index for the TACACS+ server. The index determines the sequence in which the servers
address ip-address — The IP address of the TACACS+ server. Two TACACS+ servers cannot have
secret key — The secret key to access the RADIUS server. This secret key must match the password
hash — Specifies the key is entered in an encrypted form. If the hash parameter is not used, the key
hash2 — Specifies the key is entered in a more complex encrypted form. If the hash2 parameter is
port port — Specifies the port ID.
7450 ESS System Mangement Guide
are queried for authentication requests. Servers are queried in order from the lowest index to the
highest index.
Values 1 — 5
the same IP address. An error message is generated if the server address is a duplicate.
Values ipv4-address
ipv6-address
on the RADIUS server.
Values Up to 128 characters in length.
is assumed to be in a non-encrypted, clear text form. For security, all keys are stored in encrypted
form in the configuration file with the hash parameter specified.
not used, the less encrypted hash form is assumed.
Values
0 — 65535
a.b.c.d (host bits must be 0)
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0..FFFF]H
d: [0..255]D
Security
Page 183