Alcatel-Lucent 7450 System Management Manual page 319

Sample Output
A:ALA-49>show>system>security# authentication
===============================================================================
Authentication
===============================================================================
server address
-------------------------------------------------------------------------------
10.10.10.103
10.10.0.1
10.10.0.2
10.10.0.3
-------------------------------------------------------------------------------
radius admin status
tacplus admin status : up
health check
-------------------------------------------------------------------------------
No. of Servers: 4
===============================================================================
A:ALA-49>show>system>security#
password-options
Syntax password-options
Context show>system>security
Description This command displays password options.
Output Password-Options Output — The following table describes password-options output fields.
7450 ESS System Mangement Guide
Label
health check
No. of Servers
status
up
up
up
up
: down
: enabled
Label
Password aging in
days
Number of invalid
attempts permit-
ted per login
Time in minutes
per login attempt
Description (Continued)
Specifies whether the RADIUS and TACACS+ servers will be periodi-
cally monitored. Each server will be contacted every 30 seconds. If in
this process a server is found to be unreachable, or a previously
unreachable server starts responding, based on the type of the server, a
trap will be sent.
The total number of servers configured.
sequence : radius tacplus local
type timeout(secs)
radius 5
radius 5
radius 5
radius 5
Number of days a user password is valid before the user must change
his password.
Displays the maximum number of unsuccessful login attempts allowed
for a user.
Displays the time in minutes that user is to be locked out.
single connection retry count
n/a 5
n/a 5
n/a 5
n/a 5
Description
SNMP
Page 319