Alcatel-Lucent 7450 System Management Manual page 116

General Security Commands
config>system>security>keychain>direction>uni>send>entry
config>system>security>pki>ca-profile
config>sys>sec>cpm>mac-filter>entry
Description The shutdown command administratively disables the entity. When disabled, an entity does not
change, reset, or remove any configuration settings or statistics. Many entities must be explicitly
enabled using the no shutdown command. The operational state of the entity is disabled as well as
the operational state of any entities contained within. Many objects must be shut down before they
may be deleted.
The no form of the command puts an entity into the administratively enabled state.
Default no shutdown
security
Syntax security
Context config>system
Description
This command creates the context to configure security settings.
Security commands manage user profiles and user membership. Security commands also manage
user login registrations.
ftp-server
Syntax [no] ftp-server
Context config>system>security
Description This command enables FTP servers running on the system.
FTP servers are disabled by default. At system startup, only SSH server are enabled.
The no form of the command disables FTP servers running on the system.
hash-control
Syntax hash-control [read-version {1 | 2 | all}] [write-version {1 | 2}]
no hash-control
Context config>system>security
Description Whenever the user executes a save or info command, the system will encrypt all passwords, MD5
keys, etc., for security reasons. At present, two algorithms exist.
The first algorithm is a simple, short key that can be copied and pasted in a different location when
the user wants to configure the same password. However, because it is the same password and the
hash key is limited to the password/key, even the casual observer will notice that it is the same key.
Page 116 7450 ESS System Mangement Guide