Configuring Radius Authorization - Alcatel-Lucent 7450 System Management Manual

Configuring RADIUS Authorization

Configuring RADIUS Authorization
In order for RADIUS authorization to function, RADIUS authentication must be enabled first. See
Configuring RADIUS Authentication on page
In addition to the local configuration requirements, VSAs must be configured on the RADIUS
server. See
On the local router, use the following CLI commands to configure RADIUS authorization:
CLI Syntax: config>system>security
The following displays a RADIUS authorization configuration example:
A:ALA-1>config>system>security# info
----------------------------------------------
...
...
----------------------------------------------
A:ALA-1>config>system>security#
Page 88
Vendor-Specific Attributes (VSAs) on page
radius
authorization
radius
authorization
retry 5
timeout 5
server 1 address 10.10.10.103 secret "test1"
server 2 address 10.10.0.1 secret "test2"
server 3 address 10.10.0.2 secret "test3"
server 4 address 10.10.0.3 secret "test4"
exit
87.
51.
7450 ESS System Mangement Guide