Alcatel-Lucent 7450 System Management Manual page 141

ssap
Syntax ssap ssap-value [ssap-mask]
no ssap
Context config>system>security>mgmt-access-filter>mac-filter>entry>match
Description This command configures an Ethernet 802.2 LLC SSAP value or range for a MAC filter match
criterion.
This is a one-byte field that is part of the 802.2 LLC header of the IEEE 802.3 Ethernet Frame.
The snap-pid field, etype field, ssap and dsap fields are mutually exclusive and may not be part of the
same match criteria. Refer to the Router Configuration Guide for information about MAC Match
Criteria Exclusivity Rules fields that are exclusive based on the frame format.
The no form of the command removes the ssap match criterion.
Default no ssap
Parameters ssap-value — The 8-bit ssap match criteria value in hex.
ssap-mask — This is optional and may be used when specifying a range of ssap values to use as the
svc-id
Syntax svc-id service-id
no svc-id
Context config>system>security>mgmt-access-filter>mac-filter>entry>match
Description This command specifies an existing svc-id to use as a match condition.
Parameters service-id — Specifies a service-id to match.
src-port
Syntax src-port {port-id | cpm | lag port-id}
no src-port
Context config>system>security>mgmt-access-filter>ip-filter>entry
config>system>security>mgmt-access-filter>ipv6-filter>entry
Description
This command restricts ingress management traffic to either the
other logical port (for example LAG)on the device.
7450 ESS System Mangement Guide
Values 0x00 — 0xFF
match criteria.
Values service-id:
svc-name:
1 — 2147483647
64 characters maximum
Security
CPMCCM
Ethernet port or any
Page 141