Installing Toner/Software; Output An Own-Status Report (Maintenance Item U000); Clearning The Counter (Maintenance Item U927) - Kyocera TASKalfa 1800 Service Manual

Installing toner
1. Turn the main power switch on. Toner
installation is started.
2. The drive chain is disengaged when
toner installation is completed.
Run maintenance mode U130 if [Add
Toner] remains displayed even after the
drive chain is disengaged.
*: A high pitch continuous sound may be
heard for about 10 seconds during the
toner installation. However, this is not
abnormal, so please continue the installa-
tion.
*: Perform the high altitude settings when a leakage is developed on images in a high altitude installation,
such as in Mexico City (see page 1-3-44).
U100 - High Altitude - Set mode
Installing software
1. Install appropriate software on your PC from the included Product Library disc if you want to use the
printer function of this machine or perform TWAIN / WIA transmission from your PC.
(Reference of an operation guide)

Output an own-status report (maintenance item U000)

1. Enter the maintenance mode by entering 10871087 using the numeric keys.
2. Enter 000 using the numeric keys and press the start key.
3. Select Maintenance and press the start key to output a list of the current settings of the maintenance
items.
4. Press the stop key to exit.
Clearing the counter (maintenance item U927)
1. Enter 927 using the numeric keys and press the start key.
2. Select [Excute].
3. Press the start key. The counter is cleared.
4. Press the stop key to exit.
Figure 1-2-23
1-2-16
2NC/2NF/2NG/2NN/3P7/3P8/3P9-2