Kyocera TASKalfa 1800 Service Manual page 296

5. Remove two screws.
6. Release four hooks and then remove
the operation panel assembly upward.
7. Remove the DP connector cover by
releasing two hooks using flat screw
driver.
Connector
Operation
panel PWB
Hook
1-5-18
2NC/2NF/2NG/2NN/3P7/3P8/3P9
Screw
Operation panel
assembly
Figure 1-5-27
Flat screwdriver
DP connector cover
Hook
Figure 1-5-28
Screw
Hook