Set Soft Sw; Communication Control Procedure Table - Kyocera TASKalfa 1800 Service Manual

U699

Set Soft SW

Description
Sets the software switches on the FAX control board individually.
Purpose
To change the setting when a problem such as split output of received originals occurs.
Since the communication performance is largely affected, normally this setting need not be
changed.
Method
1. Press the start key.
2. Press [SW No.].
3. Enter the desired software switch number (3 digits) using the numeric keys and press the
enter key.
Display
SW No.
4. Use numeric keys 7 to 0 to switch each bit between 0 and 1.
Display
Bit
5. Press the start key to set the value.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
List of Software Switches of Which the Setting Can Be Changed
<Communication control procedure>
No.
36
37
38
SW No.
Set the soft switch.
bit
7654 Coding format in transmission
3210 Coding format in reception
5 33600bps/V34
4 31200bps/V34
3 28800bps/V34
2 26400bps/V34
1 24000bps/V34
0 21600bps/V34
7 19200bps/V34
6 16800bps/V34
5 14400bps/V34
4 12000bps/V34
3 9600bps/V34
2 7200bps/V34
1 4800bps/V34
1-3-108
2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
Description
Description
Description