Kyocera TASKalfa 1800 Service Manual page 380

4. Remove the spring using the longnose
pliers from the attachment hole in PF
paper feed holder and the top PF paper
feed assembly.
5. Lift the paper feed holder and then
rotate it.
6. Remove the paper feed holder by pull-
ing out from the paper feed roller shaft.
7. Check or replace the paper feed holder
and refit all the removed parts.
Attachment hole
in PF paper feed holder
Spring hook
Top PF paper feed assembly
Figure 1-5-178
Paper feed
holder
Top PF paper feed assembly
Figure 1-5-179
1-5-102
2NC/2NF/2NG/2NN/3P7/3P8/3P9
Longnose pliers
Paper feed
roller shaft