Detaching And Refittinng The Cooling Fan; Direction Of Installing The Principal Fan Motors - Kyocera TASKalfa 1800 Service Manual

(14)Detaching and refitting the cooling fan
Procedure
1. Remove the rear cover.
2. Remove the connector (YC-11) of the
electric wires and then release the wire
saddles.
3. Unhook two hooks and then remove the
eject fan motor.
4. Check or replace the eject fan motor
and refit all the removed parts.

(15)Direction of installing the principal fan motors

When detaching or refitting the fan moter,be careful of the airflow direction (intake or exhaust).
Eject fan motor
Figure 1-5-146
Figure 1-5-147
1-5-83
2NC/2NF/2NG/2NN/3P7/3P8/3P9
Hooks
Connector
Eject fan motor
(Rating label: outside)
Intake