Detaching And Refitting The Dp Registration Clutch - Kyocera TASKalfa 1800 Service Manual

Hide thumbs Also See for TASKalfa 1800:

Table of Contents

(1-3) Detaching and refitting the DP ragistration clutch

1. Release the wires from the wire guide.

2. Pull two projections of the wire guide

3. Remove the wire guide by unhooking

six hooks by sliding downward.

4. Remove the connector from the regis-

tration clutch.

5. Remove the stop ring.

6. Pull out the DP registration clutch for-

7. Check or replace the DP registration

clutch and refit all the removed parts.

Figure 1-5-158

Figure 1-5-159

2NC/2NF/2NG/2NN/3P7/3P8/3P9

Wire guide (Back side)

DP registration clutch

Show Quick Links

Table of Contents