The Leading Edge Of The Image Is Sporadically Misaligned With The Original (Image Rendering Problem); Paper Is Wrinkled - Kyocera TASKalfa 1800 Service Manual

(18) The leading edge of the image is sporadically misaligned with the original.
Print example
Defective part
Paper feed clutch,
Registration clutch
1

(19) Paper is wrinkled.

Print example
Defective part
Paper-width guides Check the paper-width guides
1
Paper
2
Regist roller
3
Fuser unit
4
Check description
Check that the clutches are
properly fit.IOr, check they are
operative without a hinderance.
Check description
are flush with the paper.
1. Check if paper is curled or
wavy.
2. Check if paper is stored in a
humid place.
The pressures at the front and
back springs are unbalanced.
The pressuring spring of the
fuser unit is defective.
1. If it is not fixed properly, fix it properly.
2. If it does not operate without a hinderance,
replace the clutch.
If the width adjuster cursors are not flush with
paper, set them correctly.
1. If the paper is curled or wavy, replace.
2. Choose a dry place to store paper.
Replace the spring with the one having a
correct pressure.
Replace the fuser unit. (see page 1-5-48)
1-4-86
2NC/2NF/2NG/2NN/3P7/3P8/3P9
Corrective Action
Corrective Action