Adjustment: Lsu Out Left - Kyocera TASKalfa 1800 Service Manual

5. Change the setting value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
For output example 1, increase the value. For output example 2, decrease the value
Leading edge
registration
(20 ± 1.0 mm)
6. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following
adjustments in maintenance mode.
U034 -------- U066 -------- U071
(P.1-3-33)

Adjustment: LSU Out Left

1. Press the system menu key.
2. Press the start key to output a test pattern.
3. Press the system menu key.
4. Select the item to be adjusted.
[LSU Out Left]
Display
MPT Paper feed from MP tray.
Cas1 Paper feed from cassette1.
Cas2 Paper feed from optional cassette2.
Cas3 Paper feed from optional cassette3.
Cas4 Paper feed from optional cassette4.
Duplex Duplex mode. (second)
Correct image
Figure 1-3-3
(P.1-3-37)
Description
1-3-25
2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
Output Output
example 1 example 2
Setting
range
-10.0 to 10.0
-10.0 to 10.0
-10.0 to 10.0
-10.0 to 10.0
-10.0 to 10.0
-10.0 to 10.0
Initial Change in
setting value per step
0 0.1
-1.6 0.1
-1.6 0.1
-1.6 0.1
-1.6 0.1
0 0.1