Tm (Toner Mark) Sensor Base - Kyocera PE-MF2 Service Manual

4. Replacement and Adjustment
4
4. ITB contact sensor [B] (hooks)

TM (Toner Mark) Sensor Base

1. Open the top cover.
2. Remove all AIO cartridges (* p.35).
3. Slide the ITB unit to the front side or remove it.
4. Rear cover (* p.27)
5. Controller box cover (* p.66 "Controller Board")
6. Controller bracket (* p.68 "EGB (Engine Board)")
7. Disconnect CN306 on the EGB (
46
x 1).