Chk Toner Sensor; Adj Tnr Ctrl Lv - Kyocera TASKalfa 1800 Service Manual

U150

Chk Toner Sensor

Description
Displays the status of each sensor associated with the toner.
Purpose
To check if the sensors operate correctly.
Method
1. Press the start key.
Display
Dev sensor
2. Check the status of sensor. The current value is displayed.
* : Developer sensor are acquired and re-displayed periodically.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U156

Adj Tnr Ctrl Lv

Description
A toner supply level is adjusted.
Purpose
A toner supply level is adjusted.
Method
1. Press the start key.
2. Select the item to be adjust.
3. Change the value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
Display
Supply(H)
Supply(L)
SUpply(PH)
On Time
Off Time
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
State of the developer sensor.
Description
The maximum threshold value of toner
supply.
The minimum threshold value of toner
supply.
The prohibition threshold value of toner
supply.
Time to turn on a toner motor.
Time to turn off a toner motor.
1-3-53
2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
Description
Setting range
0.09 to 2.55
0.09 to 2.55
0.09 to 2.55
50 to 2000
50 to 2000
Initial
setting
1.30
1.00
1.50
500
100