Detaching And Refitting The Separation Needle Holder - Kyocera TASKalfa 1800 Service Manual

(2) Detaching and refitting the separation needle holder

Procedure
1. Remove upward the separation needle
holder and separation needle by releas-
ing three hooks of rear side of the sepa-
ration needle holder.
2. Check or replace the separation needle
and refit all the removed parts.
Hook
Figure 1-5-76
1-5-45
2NC/2NF/2NG/2NN/3P7/3P8/3P9
Separation needle
Separation needle holder