Exit Mainte; Set Factory Def - Kyocera TASKalfa 1800 Service Manual

U001

Exit Mainte

Description
Exits the maintenance mode and returns to the normal copy mode.
Purpose
To exit the maintenance mode.
Method
1. Press the start key. The normal copy mode is entered.
U002

Set Factory Def

Description
Restores the machine conditions to the factory default settings.
Purpose
To move the mirror frame of the scanner to the position for transport.
Method
1. Press the start key.
2. Select [Mode1(All)].
3. Press the start key.
It brings near by a left end so that the carriage of Scanner can be fixed.
Display
Mode1(All)
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
* : An error code is displayed in case of an initialization error.
When errors occurred, turn main power switch off then on, and execute initialization using
maintenance item U002.
Error codes
Codes
0001
0020
0040
A factory-default setup is performed.
Controller
Engine
Scanner
1-3-16
2NC/2NF/2NG/2NN/3P7/3P8/3P9
Description
Description