Send Error Code - Kyocera TASKalfa 1800 Service Manual

1-4-9 Send error code

The error generated at the time of PushScan is shown.
Detection of an error will display the following error message on MFP panel.
Send Error message
USB connection was cut. It was drawn out while the USB cable
Network connection was
cut.
An error occurs in image
processing.
Cause
communicated. Or the USB cable is
not connected correctly.
It was drawn out while the Network
cable communicated. Or the Net-
work cable is not connected cor-
rectly.
The error was detected while pro-
cessing the picture which the PC
side received.
1-4-94
2NC/2NF/2NG/2NN/3P7/3P8/3P9-4
Corrective Action / Comments
A USB cable is re-connected. The JOB
is uncontinuable.
JOB which this error generated is can-
celed compulsorily.
A Network cable is re-connected. The
JOB is uncontinuable.
JOB which this error generated is can-
celed compulsorily.
Please reconfirm whether it is what is
permitted that the manuscript scans.
The JOB is uncontinuable.
JOB which this error generated is can-
celed compulsorily.