U161
Adj Fuser Temp
Description
Changes the fuser control temperature.
Purpose
Normally no change is necessary. However, can be used to prevent curling or creasing of paper, or
solve a fuser problem on thick paper.
Method
1. Press the start key.
2. Select the item to be adjusted.
3. Change the setting value using change keys * or numeric keys.
* : Zoom/Paper selection key (Basic model), Right/Left arrow key (Advanced model)
Display
T1
T2
T3
T4
4. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Setting of target temperature of 1st
stable temperature. (Ready)
Setting of target temperature of 2nd
stable temperature. (Standby)
Setting of target temperature at a con-
tinuation copy. (1st copy)
Setting of target temperature at a con-
tinuation copy. (Final)
1-3-55
2NC/2NF/2NG/2NN/3P7/3P8/3P9-2
Setting range
Initial setting
130 to 220 (°C)
130 to 220 (°C)
130 to 220 (°C)
130 to 220 (°C)
120
160
150
160