Mitsubishi Electric MR-J2S-A Instruction Manual page 93

Servo amplifier

Hide thumbs Also See for MR-J2S-A:

Table of Contents

3. SIGNALS AND WIRING

(7) Source input interface

When using the input interface of source type, all Dl-1 input signals are of source type. Source output

cannot be provided.

For use of internal power supply

For a transistor

Note. This also applies to the use of the external power supply.

When using the input interface of source type, all Dl-1 input signals are of source type. Source output

cannot be provided.

For 11kW or more, the source input interface cannot be used with the internal power supply. Always

use the external power supply.

Note. The jumper, which is shown black for the convenience of explanation, is actually white.

Servo amplifier

R: Approx. 4.7

For use of external power supply

Servo amplifier

200mA or more

For sink input (factory setting)

R: Approx. 4.7

For source input

Show Quick Links

Table of Contents