[Back Color]; [Wide Mode]; [Sxga Mode]; [P-Timer] - Panasonic PT-SW280A Operating Instructions Manual

[BACK COLOR]

Set the display of the projected screen when there is no signal input.
Press as to select [BACK COLOR].
1)
Press qw to switch the item.
2)
f The items will switch each time you press the button.
[BLUE] Displays the entire projection area in blue.
[BLACK] Displays the entire projection area in black.
[DEFAULT LOGO] Displays the Panasonic logo.
[USER LOGO] Displays the image registered by the user.
Note
f To create/register the [USER LOGO] image, use "Logo Transfer Software" included in the supplied CD-ROM.

[WIDE MODE]

Using this function when the image is displayed incorrectly for the input signals.
Press as to select [WIDE MODE].
1)
Press qw to switch the item.
2)
f The items will switch each time you press the button.
[AUTO]
[OFF]
[ON]

[SXGA MODE]

This function is used if the whole projected image is not displayed when the resolution 1 280 x 1 024 dots of the
SXGA signal is input.
Press as to select [SXGA MODE].
1)
Press qw to switch the item.
2)
f The items will switch each time you press the button.
[AUTO]
[1 280x1 024]
[1 400x1 050]

[P-TIMER]

Set and operate the presentation timer function.
Setting the mode
Press as to select [P-TIMER].
1)
2)
Press the <ENTER> button.
f The [P-TIMER] screen is displayed.
Press as to select [MODE].
3)
Press qw to switch the item.
4)
f The items will switch each time you press the button.
[COUNT UP]
[COUNT DOWN]
Chapter 4 Settings — [DISPLAY OPTION] menu
Displays by judging the signal automatically. Set to this mode normally.
When input the 4:3 signal.
When input the wide signal.
Displays by judging the signal automatically. Set to this mode normally.
Switches the item to [1 280x1 024] or [1 400x1 050] manually if the whole projected image is not displayed
when SXGA signal is input.
Displays the elapsed time since the count was started.
Displays the remaining time of the time set by [TIMER].
ENGLISH - 67